Tek-Trol, 1610D-040-A-01-G-05-A-XX-D-A-01, 1-1/2" Integral Orifice Assembly
Features:
- Very high accuracy when equipped with associated piping.
- Can be used with any differential pressure transmitter having standard process connections.
- The transmitter can be either integrally coupled or remotely connected.
- A 3-Valve Manifold is recommended for mounting between the Model TEK-DP 1610D Integral Orifice Assemblies and transmitter.
- Process-wetted material meets NACE Standard MR-01-75.
- Self-centering orifice plate design.
- No-flow-through transmitter body.
- Orifice plate manufacture consistent with ASME, ISO, and AGA-3 standards
Construction:
Convenient Sizing
The Model TEK-DP 1610D Integral Orifice Assemblies are suitable for liquid, gas, and steam applications.By choosing the correct combination of assembly size and orifice bore, almost any desired flow rate, witheither turbulent or laminar flow conditions, can be measured.
Handles Wide Ranges of Flow Rates
The flow rate ranges handled by these TEK-DP 1610D Integral Orifice Assemblies (Each range depends onthe specific combination of assembly size and orifice bore) are those frequently found in chemical andpetrochemical plants, research projects, and high-accuracy metering applications.
Highly Accurate Measurements
The orifice assembly can be supplied with associated piping welded to it. This piping can have a variety ofend connections (For installation into the user's process piping). All essential parts are bored to assure aprecise inside diameter which is highly concentric with the orifice bore. This permits a Beta ratio (ratio oforifice bore to pipe ID) that is tightly controlled. The results are measurements that are far more accuratethan could otherwise be obtained.
Simplified Installation
The TEK-DP 1610D Integral Orifice Assemblies become part of the process piping. The transmitter isbolted directly onto the orifice assembly; thus, no transmitter piping is required. The transmitter can be isolated or bypassed by the addition of a three-valve bypass manifold. This permits the zeroing, calibration check, and maintenance of the transmitter without either interrupting the flow or removing the TEK-DP 1610D Integral Orifice Assemblies from the process line. Both the bypass manifold and the transmitter are bolted together as a unit, and the pair is mounted directly onto the orifice assembly.
