PCE Instruments, PCE-RT 2000BT, Material Roughness Tester with Bluetooth-Function
PCE-RT 2000BT Includes Only:
- 1 x Profilometer PCE-RT 2000BT
- 1 x Microprobe
- 1 x Protective cap for buttons
- 1 x Clamping device
- 1 x Software
- 1 x Calibration plate
- 1 x Roughness standard
- 1 x USB cable
- 1 x Charging adapter
- 1 x Transport case
- 1 x User manual
Features:
- OLED display
- Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc
- Numerical and graphical display of measured values
- Micro USB cable
- 3 different cutoff wavelengths
- PC software
- Statistical functions
- Battery operation
- Bluetooth
The profilometer PCE-RT 2000 is used for the accurate measurement of surface roughness. The profilometer can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezo sensor. The profilometer measures the ranges Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc and is, therefore, a universal profilometer in quality assurance. The profilometer is simply placed on the surface for measurement. During the measurement process, a probe is pulled over the surface and the profilometer displays the measured value on the large, OLED display. In addition to the numerical measured value display, the measuring profile can be graphically visualized. The profilometer PCE-RT 2000 is powered by a rechargeable battery. The charger of the profilometer is included in the delivery. The profilometer has an automatic shut-off function for battery care.
The profilometer PCE-RT 2000 has a Micro USB cable. The measuring device can be charged via this connection. Furthermore, the measurement data can be transmitted from the profilometer to the software. So it is possible to create a complete documentation of the measurement.
Rz = average roughness
The average roughness depth Rz is the arithmetic mean of the largest single-order depths of several adjacent individual measurement sections.
Ra = arithmetic means roughness
Ra is the generally recognized and internationally applied roughness parameter. It is the arithmetic mean of the absolute values of the profile deviations within the reference distance. The measured value Ra is always smaller than the Rz value determined on the same roughness profile.
Rt = maximum roughness
The maximum surface roughness Rt is the distance between the highest and the lowest point of the measuring section.
Rq = Square Mean Roughness
Rq is the root mean square of all ordinate values within the individual measurement distance l. Rq corresponds to the designation RMS (Root Mean Square).
