| External Sensor Measurement Range | -90°C to +40°C (-130°F to +104°F). |
| Operating Temperature Range | - -30°C to +60°C (-22°F to +140°F)
- 0-99% RH (non-condensing)
|
| Storage Temperature Range | 0°C to +40°C (32°F to +104°F). |
| Rated Temperature Resolution | - Better than 0.1°C (0.2°F) for measurements -80°C to 10°C (-112°F to 50°F)
- Better than 0.2°C (0.4°F) for measurements 10°C to 20°C (50°F to 68°F) and -90°C to -80°C (-130°F to -112°F)
- Better than 0.3°C (0.5°F) for measurements 20°C to 30°C (68°F to 86°F)
- Better than 0.5°C (0.9°F) for measurements 30°C to 40°C (86°F to 104°F)
- LogTag Analyzer currently displays to one decimal place of °C or °F. The native resolution is what is stored in the LogTag®.
|
| Sensor Reaction Time | Typically less than 2 minutes(T90) in moving air (1m/s) for ST10S type |
| Rated Temperature Reading Accuracy | - Better than ±0.5°C for -20°C to +10°C (-4°F to 50°F)
- Better than ±0.7°C for -50°C to -20°C (-58°F to -4°F) and +10°C to +30°C (50°F to 86°F)
- Better than ±1°C for -80°C to -50°C (-112°F to -58°F ) and +30°C to +40°C (86°F to 104°F)
- Better than ±1.8°C for -90°C to -80°C (-130°F to -112°F)
|
| Probe Connectivity | Up to 2 |
| Probe Compatibility | - All ST10 precision thermistor external probes can be interchangeably connected to the UTREL30-16.
- Please refer to the Accessories section for compatible External Probes. Different probe models can be used for each channel. Not compatible with ST100 sensors.
|
| Recording Capacity | - 32,000 total log memory. Provides 16,000 temperature readings per channel.
- Day summary statistics memory (for display on LCD): up to 30 days of Min/Max/duration and alarm trigger statistics.
|
| Sampling Interval | Configurable from 30 seconds to 18 hours. (Typically 5 minute logging) |
| Alarms | - Up to 6 configurable alarms for each channel.
- Possible to set alarm separately for Channel 1 and Channel 2.
|
| Logging Start Options | Push button start (with configurable start delay from 1 minute to 72 hours) or specific date & time. |
| Download Time | Typically with full memory (32,000 readings) in less than 20 seconds. |
| Environmental | IP61 (when vertically mounted or hung with USB dust-cap in place). |
| Power Source | 5V via micro USB socket or 2 x 1.5V AAA batteries. CR2032 LiMnO2 coin cell (backup logging function only). |
| Battery Life | AAA battery up to 12 months - if unit is operated without power supply. |
| Real Time Clock | - Built-in real time clock.
- Typical accuracy ±25ppm at 25°C (equivalent to 2.5 seconds/day).
- Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C).
|
| Connection Interface | USB 2.0 / Micro USB Socket. |
| Standard Remote Probe Cable Lengths | - Standard: 1.5m (4'-11").
- Extended: 3m (9'-10") (recommended maximum).
|
| Remote Probe Cable Type | PTFE (FDA food contact rated) coaxial. |
| Size | 141mm(H) x 72mm(W) x 18mm(T). |
| Weight | 156g with AAA batteries, (132g - excluding probe and AAA batteries). |
| Case Material | Polycarbonate. |
