Grass Valley FGAN IQMIX1000B-RP IQMIX10 Multichannel IP Transceiver

Grass Valley, FGAN IQMIX1000B-RP, IQMIX10 3G/HD/SD-SDI Multichannel IP Transceiver

The IQMIX10 is Grass Valley's entry-level video-over-IP transceiver developed for use within low latency and high bandwidth Ethernet IP networks. Using RTP VSF TR-03 (SMPTE ST 2110), TR-04 and SMPTE ST 2022-6 encoding and encapsulation schemes enables the IQMIX10 to encode or decode up to 12 SDI signals (6 in and 6 out) and transport them over redundant 10 GbE links. IQMIX10 provides frame-synchronized SDI outputs along with both compressed and uncompressed modes of operation. Using SMPTE ST 2042 (VC2) lightweight compression allows for high-quality signal carriage while optimizing bandwidth requirements, and sending signals uncompressed provides the best quality transport, although at the expense of bandwidth. Encapsulation of signals in an SMPTE ST 2022-6 transport stream provides compatibility with other video-over-IP solutions. IQMIX10 fully integrates with remote control and monitoring systems to provide easy setup and real-time information on signal presence and status for each channel.

Features:

• Handles up to 12 SDI signals over dual 10 GbE IP links (dependent on SDI signal format and compressed or uncompressed transport mode)
• Supports configuration of Ethernet links for maximum signal transport using both SFPs, or for dual link mode to provide link redundancy as per SMPTE ST 2022-7
• Supports frame synchronized SDI inputs and outputs referenced to either IEEE-1588v2 (PTP) network timing (compliant with SMPTE ST 2059-2) or via the IQH3B or IQH4B frame's analog reference bus for Black Burst / tri-level syncs
• Includes 4K UHD quad link mode for 3G SQD or 2SI signal transport
• Supports uni-cast as well as IGMPv3 source-specific multicast, allowing point to point operation or transmission in multicast groups
• RollCall control and monitoring compatible with standard logging and reporting features