Buy Crowcon TP-BPZZZZZZ-A-001-A, Triple Plus+ IR 1 Gas Detector, Flam IR

info@megasolutions.llc

1-855-969-9322
1-908-282-3332 (Intl.)

Crowcon, TP-BPZZZZZZ-A-001-A, Triple Plus+ IR Portable 1 Gas Detector, Flam IR, Pumped, Ethylene, UK, ATEX

Triple Plus+ Base Includes Only:

Gas Monitor
Manual
Shoulder strap
Additional flow plate
2m hose
Pouch
Allen keys

Features:

Piercing 85dB Alarm At 1m - gives you confidence in the status of your Triple Plus+, and the environment you're working in
Vivid LED Alarms with Top Visibility
Confidence Blip, Low Battery and TWA Warnings
Timed Data Logging with 100-hour capacity
Wide Range of Electrochemical Oxygen and Toxic Gas Sensors - allows you to create your optimum 4 gas Triple plus+
Interchangeable Sensor Modules
Comprehensive Data Logging with site and user names
TriaxTM Casing Will Not Crack Or Shatter When Dropped - system integrity and operation assured
Unique Internal Design Will Resist The Harshest Treatment
Full Buoyancy - makes recovery from water possible
Simple WindowsTM Software Interface - user menus allow calibration with or without connecting to a PC
QuickCal For Rapid Calibration

Triple Plus+ is a multigas detector providing triple protection, against toxic, oxygen and flammable gas hazards. Intrinsically safe, the Triple Plus+ provides enhanced capabilities for safety and detector fleet managers including a selection of flammable gas correction factors (so one unit can be used in several locations across a site).

See more product information See less

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Reviews

Range

Ethylene: 0-10ppm

Standard Alarm

Ethylene: 5ppm

Size

118 x 200 x 73mm (4.65 x 7.8 x 2.9ins)

Weight

880g gas (31oz)

Alarms

Piercing, rapid intermittent, piezo-electric tone 85 dB at 1 m Confidence blip (selectable) Distinctive double blip for low battery with user accept
Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: a distinctive double flash of green LED

Display

2 lines of 24 characters, dot matrix high contrast LCD with backlight operating for 30 minutes Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels Low battery, pump failure, real-time and elapsed time, calibration, and configuration data also displayed

Data Logging

Adjustable sample rate, 100 hours at 1-minute sample rate (maximum 6000 data points per channel), logging of events, user and site

Battery

Rechargeable Li-ion battery pack
10 hours
Charging: Dual rate drop-in charger; Dual rate charger/PC interface

Typical Response Times

Methane 20s (Triple Plus+) IR 20s (Triple Plus+IR), Oxygen 10s, typical Toxic Gas 20s

Sampling

Optional internal electric pump with on/off button

Operating Temperature

-20°C to +50°C (-4°F to 122°F)

Humidity

20 to 90% RH non-condensing

Ingress Protection

IP65

Approvals

ATEX II 2G: Ex ib d IIC T4 Gb Ta -20°C to +50°C

Safety Standards

EN50014, EN50020, EN50018-2, EN50270, EN50082-2

Calibration

Tetra can be routinely calibrated manually using the menu, using Crowcon Portables PC software.

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Product Details

Range

Ethylene: 0-10ppm

Standard Alarm

Ethylene: 5ppm

Size

118 x 200 x 73mm (4.65 x 7.8 x 2.9ins)

Weight

880g gas (31oz)

Alarms

Piercing, rapid intermittent, piezo-electric tone 85 dB at 1 m Confidence blip (selectable) Distinctive double blip for low battery with user accept
Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: a distinctive double flash of green LED

Display

Data Logging

Adjustable sample rate, 100 hours at 1-minute sample rate (maximum 6000 data points per channel), logging of events, user and site

Battery

Rechargeable Li-ion battery pack
10 hours
Charging: Dual rate drop-in charger; Dual rate charger/PC interface

Typical Response Times

Methane 20s (Triple Plus+) IR 20s (Triple Plus+IR), Oxygen 10s, typical Toxic Gas 20s

Sampling

Optional internal electric pump with on/off button

Operating Temperature

-20°C to +50°C (-4°F to 122°F)

Humidity

20 to 90% RH non-condensing

Ingress Protection

IP65

Approvals

ATEX II 2G: Ex ib d IIC T4 Gb Ta -20°C to +50°C

Safety Standards

EN50014, EN50020, EN50018-2, EN50270, EN50082-2

Calibration

Tetra can be routinely calibrated manually using the menu, using Crowcon Portables PC software.

Note

Note: Please read description carefully. Do not base your order on the picture presented.

Reviews

Crowcon TP-BPZZZZZZ-A-001-A Triple Plus+ IR 1 Gas Detector, Flam IR

Identifiers

Technical Details

Reviews