ComNet CLLFE1POEC Ethernet Extender over Coax Local Single-Channel

Comnet, CLLFE1POEC, Ethernet Extender over Coax Local at PoE Passthrough Supported Single-Channel

Features:

• Transmits individual Ethernet data channels with PoE+ power injection or pass-through PoE+ over standard UTP or Coaxial cable
• Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
• Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over Coaxial cable
• Extended temperature operation from -40°C to +75°C
• Extended pass-through PoE meets the IEEE 802.3at standard for Power over Ethernet
• Full 10/100 Mbps bandwidth
• Supports Multicast, Unicast, and Jumbo Frame
• Symmetric bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance
• Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
• User-selectable data rate for maximum bandwidth and transmission distance utilization
• Complies with all major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPs
• Tested and certified by an independent laboratory for full compliance with the environmental requirements of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications, including:
  • Ambient operating temperature
  • Mechanical shock and vibration
  • Humidity with condensation
  • High-line/low-line voltage conditions
  • Transient voltage protection
• LED status indicators confirm operating status
• Available in small-size, ComFit interchangeable standalone or 1RU high rack mounted models
• Designed and manufactured in the USA

Applications:

• Retrofit existing analog CCTV installations to Ethernet-based systems
• CCTV systems for casinos, airports, and school campuses

The ComNet CopperLine Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with PoE+ Power Injection and Pass-through PoE+ over twisted pair cable (CAT-5, UTP) or over coax. With the ability to connect directly to a PoE+ switch, or the ability to generate PoE+ power with a 48 to 56 V input* to either the Local or Remote ends, these units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. A complete set includes both a Local and Remote module. Remote units are available in small package sizes that include one or four channels, and Local modules are available in the same packages as well as a 1RU rack for larger channel counts.

For more information, please see Data Sheet