BZBGEAR, BG-PSC8X2HDB, 8x2 18Gbps UHD Seamless Presentation Switcher with HDBaseT
BG-PSC8X2HDB Includes Only:
- 1x 8x2 Seamless UHD Presentation Switcher
- 1x HDBaseT Receiver
- 1x AC Power Cord
- 1x User Manual
- 2x Mounting Ear & 2x Handle
- 12x 3-pin Phoenix Connector
- 1x 4-pin Phoenix Connector
- 1x 5-pin Phoenix Connector
- 1x IR Blaster Cable (1.5 meters)
- 1x IR Receiver Cable (1.5 meters)
Features:
- Crystal clear images: Stunning image quality in 4K at 60 4: 4: 4
- Integrated microphone mixer: Features adjustable trim and 48V Phantom Power
- HDBaset output: Extend signal up to 70 meters at 1080P, or 45 meters at 4K
- Integrated audio amplifier: Power 2 speakers via 20W stereo outputs
- EDID Management: Eliminates video compatibility issues
- Multiple control: Bi-Directional IR, RS232, and IP Control
- HDMI 2.0, HDCP 2.2, and DP 1.2 compliant
- Support seamless switching
- Support 18 Gbps video bandwidth
- 8 video inputs: 6 HDMI ports, 1 DP port, 1 VGA port
- Mirrored output with HDMI and HDBaseT output ports
- 9 audio source selections (LR1 to LR8 and embedded audio) for HDMI/DP input
The BG-PSC8X2HDB is an 18Gbps 8x2 seamless 4K presentation switcher. Equipped with 8 video inputs including 6 HDMI ports, 1 Display Port, and 1 VGA port, this HDMI 2.0, HDCP 2.2, and DP 1.2 compliant unit supports multi-format signal processing for seamless switching between all sources. It features automatic input scaling at resolutions up to 4K at 60Hz 4: 4: 4.
Video output is simultaneous HDMI and HDBaseT ports. The HDBaseT output extends the signal up to 70 meters at 1080P or 45 meters at 4K. Third-party control is supported with bi-directional IR and RS-232 connections and the equipped EDID management helps eliminate video compatibility issues.
Easily embed audio with any of the 8 stereo inputs. The integrated microphone mixer supports adjustable trim and 48V phantom power. Extract audio from the balanced output or power 2 speakers with the 20W stereo output.
Interfaces:
- LCM screen: Display EDID, output resolution, audio configuration, and other information.
- Power LED: When the product is powered on, the red LED will illuminate.
- IR: IR LED.
- Input buttons: Press these buttons to switch the corresponding HDMI/DP/VGA input source.
- Microphone button: Short press the button to switch on/off MIC input. Long pressing the button the LCM screen will display the MIC volume control interface.
- Audio button: Press the button to switch on/off the current audio source except MIC.
- Video button: Press the button to switch on/off video input.
- MENU, ENTER button: These three buttons are combination buttons, which can be used to adjust output resolution/EDID management/ audio source selection for each input port/output HDCP mode.
- Mute LED: When the speaker is muted, the LED will illuminate.
- Volume knob & button: Rotate the knob to adjust speaker volume (range 0~50), press the knob to mute/unmute the speaker. This knob can also be used to control MIC volume.
- PC control: LAN port: Connect to a router.RS-232 CTL: Connect to a PC or control system.
- I/O port: I1 & I2 are for input level detecting and O1 & O2 are for output level setting.
- Audio Inputs: Audio input ports. Connect to an external audio source device.
- Microphone In: Dip switch: Used to switch 48V (Phantom Power) /MIC/LINE microphone modes. Phoenix connector: Used to connect microphone devices.
- SPKR port: Audio output port, connects to an audio output device such as a speaker.
- Line Out port: Balanced audio output port. Connect to a speaker.
- RS-232 ports: RS-232: Reserved port.RS-232 BP: Used to transmit a separate RS-232 signal superimposed on HDBaseT transmission.
- IR Out/In: Connect to IR receiver/blaster cable.
- Power switch & port: Power switch: Switch on / off the power supply.Power port: Connect to 100~240V AC 50/60Hz power cord.
- GND: Ground the product housing.
- Input ports: 6 HDMI ports, 1 DP port, 1 VGA port. Connect to source devices.
- Service port: Firmware update port.
- HDMI port: HDMI output port. Connect to an HDMI display device such as a TV or monitor with an HDMI cable.
- HDBaseT port: HDBaseT output port. Connect to the HDBaseT Receiver via a CAT cable.