Buy QSC AD-S10T-WH, 2-Way 250W Surface Mount Loudspeaker, 10", White

info@megasolutions.llc

1-855-969-9322
1-908-282-3332 (Intl.)

AD-S10T-WH Includes Only:

Features:

DMT (Directivity Matched Transition) ensures smooth, uniform frequency response over the coverage area
Patent pending X-Mount enables the loudspeaker to be easily installed and deployed at a variety of angles without slipping over time
Euroblock connectors allows pre-wiring of the system
Low saturation 70/100V transformers with 8 ohm bypass
Lightweight ABS enclosures offer long-term durability and lasting good looks

We aim to show you accurate product information. Here you will find what the manufacturers have provided us with. See our disclaimer.

Technical Details

Effective frequency range	50 Hz - 19 kHz
Rated noise power / voltage	250 watts / 45 volts (rms)
Broadband sensitivity	92 dB SPL
Coverage angle (-6 dB)	90° conical DMT
Directivity factor (Q)	10
Directivity Index	10 dB
Maximum continuous SPL	116 dB
Maximum peak SPL	122 dB
Rated impedance	8 ohms
Recommended amplifier power (loudspeaker "program" power)	500 watts
Transformer taps	70 V: 100, 50, 25, 12.5 W and 8Ω bypass 100V: 100, 50, 25 W and 8Ω bypass
HF transducer	1-inch exit / 1.4-inch voice coil compression driver
LF transducer	10-inch weather resistant paper cone woofer 2.5-inch / 64 mm voice coil
Input connector type	Euroblock connector with parallel output terminals
Enclosure material	Painted ABS polymer
Grille material	Powder coated aluminum
X-Mount material	Powder coated aluminum
Enclosure Details
Ingress protection	IP-54
Operating environment	Designed for indoor and outdoor use
Testing	The AD loudspeakers qualified for outdoor use using the following tests: Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight	31 lb / 15 kg
Product dimensions (HWD) inches	20.3 x 12.5 x 11.7
Product dimensions (HWD) mm	516 x 318 x 298
Shipping weight	40.6 lb / 18.45 kg
Shipping dimensions (HWD) inches	31.7 x 16.1 x 16.1
Shipping dimensions (HWD) mm	805 x 409 x 409

Notes

* Free Ground Shipping within the continental U.S. only (excludes Alaska, Hawaii, PO Boxes and APO/FPO addresses).

Effective frequency range	50 Hz - 19 kHz
Rated noise power / voltage	250 watts / 45 volts (rms)
Broadband sensitivity	92 dB SPL
Coverage angle (-6 dB)	90° conical DMT
Directivity factor (Q)	10
Directivity Index	10 dB
Maximum continuous SPL	116 dB
Maximum peak SPL	122 dB
Rated impedance	8 ohms
Recommended amplifier power (loudspeaker "program" power)	500 watts
Transformer taps	70 V: 100, 50, 25, 12.5 W and 8Ω bypass 100V: 100, 50, 25 W and 8Ω bypass
HF transducer	1-inch exit / 1.4-inch voice coil compression driver
LF transducer	10-inch weather resistant paper cone woofer 2.5-inch / 64 mm voice coil
Input connector type	Euroblock connector with parallel output terminals
Enclosure material	Painted ABS polymer
Grille material	Powder coated aluminum
X-Mount material	Powder coated aluminum
Enclosure Details
Ingress protection	IP-54
Operating environment	Designed for indoor and outdoor use
Testing	The AD loudspeakers qualified for outdoor use using the following tests: Salt fog: MIL-STD-810G Method 509.5 for 100 hrs. Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days High and low temperature: tested to QSC internal standards between -20° and 50° C
Net weight	31 lb / 15 kg
Product dimensions (HWD) inches	20.3 x 12.5 x 11.7
Product dimensions (HWD) mm	516 x 318 x 298
Shipping weight	40.6 lb / 18.45 kg
Shipping dimensions (HWD) inches	31.7 x 16.1 x 16.1
Shipping dimensions (HWD) mm	805 x 409 x 409

Note: Please read description carefully. Do not base your order on the picture presented.